EvilZ wrote:
Well, the Four Winns part number for the '02 Funship foam is 119-20084 FOAM, ENGINE HOOD 214FS "02".
Not sure how they sell it, if it is precut, etc, but maybe that will give you a head start with them if you ever hear back from the dealer.
Been trying to send you the following message on the forum for a couple days but, I keep getting an Error. I contacted Administrator Scott in which he helped me out. Thanks Scott!
Hi, I'm sorry for the long delay in getting back to you. I had a personal issue in the family that I've been dealing with. Thank You for chiming in giving me the part numbers. The dealer, Skipper Buds did get back with me and stated that they could get it from the factory. It's supposed be the same type of egg crate foam in which they are still using. The cost is $8.50 sq. ft. which comes in 3' x any length. I need approx. 35 sq. ft. which places it at about $300.00.
As for adhesive, 3M has a good one called Super Trim Adhesive 08090 which has very good heat resistance. I found it online anywhere from $28.00 to $42.00 for a 19oz. can. 3M states that the application calls for three coats per surface. With that being said, I would need around 14 cans coming in at approx. $400.00... WoW!! I'm currently looking for an alternative but of course, I would want it to be a proven good one as well for this application. Skipper Buds told me that FourWinns uses 55 gallon drums and couldn't get a number and/or mfg. I asked 3M if they had anything comparable in a brushable application. They stated that they didn't have anything. Brushable would be nice for at least the underside of the hatch compared to spraying which will be a huge P.I.A. Thanks again, appreciate your help..... sorry it took so long. Thanks