www.iFourWinns.com

I just picked up a 2004 H210 (pictures coming soon) and I want to replace a few of the yellowed cup holder with SS or Aluminum ones. I've taken measurements and the OEM ones say 'Beckson' in the bottom but I can't find an exact fit online for a replacement. The ones in there are standard plastic with no drains, 3 11/16" wide external (3 7/16" internal) and 3 1/8" tall.

Also, the gal that sold it to us let her son take the cooler with him to college after we agreed to buy the boat. The H210 has a fitted form under the left rear set to hold the cooler - an Igloo I think - but want to know if anyone has an idea on how to replace that exact cooler. Would rather not do the trial-and-error-three-visits-to-Walmart process. Thanks.

Congrats... I really like the 210's!

I'm pretty sure the coolers are just a standard cooler. One of our extra coolers looks identical (I believe). I'll check tonight to see if it fits too if no one else chimes in.

Best wishes with your new boat!

_________________
Current: 2006 H200 5.0 GXI SX Blue/White
Previous: 2003 H220 VP 5.7 Gi DP
Black/White

Pretty sure it isn't the standard cooler.

I ordered mine from Overton's and got the exact fit. I never found one that would fit in any store, Wal Mar, Target, Bass Pro, etc.

I also got an Igloo marine series from Costco but it's a smidge too tall but it does fit great in the ski locker.

_________________
2005 Horizon 210, 5.7L Volvo

Our cup holders are the same size. I replaced mine with these from iboats.com:

http://www.iboats.com/Stainless-Steel-R ... _id.341912

great price and they come with a rubber pad that fits perfectly in the bottom for added grip or padding. It also has an adhesive pad around the flange that will adhere it to the fiberglass, but I also used a thin coat of marine-grade sealant as well. Worked like a charm and they look great.

hope this helps

_________________
'04 Four Winns Horizon 250 - Volvo Penta 5.7L DP

Nope... just checked tonight and mine are not exactly the same. The cooler from the boat is an Igloo 36 Marine and our other is an Igloo 36 Legend. The Legend slides in fine and you can close the seat but doesn't settle all the way down in the craddle. So it would bounce around a bit. Bottom of the Marine is clearly just a tiny bit smaller to fit right in there.

All the best!

_________________
Current: 2006 H200 5.0 GXI SX Blue/White
Previous: 2003 H220 VP 5.7 Gi DP
Black/White

Nice... mine will get replaced this winter too. Sharp!

_________________
Current: 2006 H200 5.0 GXI SX Blue/White
Previous: 2003 H220 VP 5.7 Gi DP
Black/White

The marine cooler in my H200 '07 is standard size (maybe 10gallons?)... I already broke the plastic lid hinges on mine early summer... but instead of buying a new cooler I just re-inforced them them by cutting pieces of plastic from used soda bottles... you can't even tell it has been modified... my cooler doesn't have a drain plug.. but if I were to replace it, the new one would have a hole to drain the melted ice water out in to the bilge... if you buy a new one, you should consider getting one with a plug... those cup holders are available at west marine in either stainless or white plastic (if you get the white plastic, you can pull them out periodically and clean them in your dishwasher-- this works well)...

_________________
2007 FW Horizon 200 5.0GXi/SX-A

_________________

Thanks for the links to the cooler. From the measurements it appears that's the correct cooler but the bottom of the seat has four black plastic chocks screwed into it to keep the seat from moving around in the opening. It appears the cooler is the exact same height as the opening so how did the seat cushion fit with the cooler in? Did you have to move the chocks? Thanks.