www.iFourWinns.com

Just gathering up some parts in the off season and am wondering if any one can tell me how long the thru hull fittings are. I need to put one in the bottom of the hull in the bilge are and one out the side of the hull in the aft cabin. This is for a 2000 248

Thanks in Advance

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike

its hard to say unless someone has done it on that boat. however pretty much any marina or boating store will have lots in stock in both plastic and the different metals for whatever you need.

_________________
Brian Borchik
The Winds of Cold Springs Harbor Marina
Baldwinsville, NY

I should have pics at home of both the bilge thru hull and the side one as well.

I would definately go with stainless steel and not plastic. What sizes are they offered in?

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225

All lengths are 2-3/4" thru 3-1/2"

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

Here's the side discharge thru hull FW lists for my boat....

http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1



The bottom intake thru hull

http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225

Thanks Joe.

Any idea on the length. My FW dealer just sticks it to you when you order parts from them!!!

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike

The first one is an Attwood part....66546-1

http://www.amazon.com/dp/B001HC4VJ6/ref ... B001HC4VJ6

http://www.attwoodmarine.com/userfiles/ ... llscup.pdf

The second is a Perko 322 005

http://www.boatersworld.com/product/MP80820614.htm

Second down on this page, http://www.boatfix.com/bypartnokey.ASP? ... tem=&make=

Although this looks like the same part..
http://www.defender.com/product.jsp?pat ... &id=142432

The valve appears to be a
4726K12 from McMaster-Carr which they say was replaced by a 4726K24.

http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1



Looks like a plain 3/4" bronze ball shut off valve to me.

Sorry to hear about your dealer. I have a great dealer...sure they can help once they get back from winter break.

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225