www.iFourWinns.com

Has anyone installed a table in a 230 Horizon? We have the wrap around seating in the rear and thought would be a great place for a table, when enjoying a drink or two. Was thinking a hole in the floor type but not sure the clearence to fuel tank. Thanks in advance, hope to get some response.

_________________
Martin
2001 Horizon 230

We put one in our H190. It's the type with the hole in the floor so there is clearance even in our smaller boat.

I'll add that it's the best thing we've ever done to our boat. We have the sunsport seating so when we swivel our seats toward the stern we have seating for four with access to the table.

I don't have any pics of it in the boat, but this is the one we had installed.

http://www.toddusa.com/productdetails.aspx?id=129&f=11

_________________
2010 H190 4.3VP
Tow Vehicle:
2007 F150
Previous boats:
2009 H180 3.0VP
1996 Horizon QX 3.0VP

These work great and nothing on the floor to worry about stumbling on.



Garelick 75359

Very sturdy and stows away easily when not in use.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

Thanks guys.

_________________
Martin
2001 Horizon 230

2nd cap'n!

The mounting bracket is way strong enough, tabled and mount are solid, and all stores easily on our boat. Only draw back is they don't have a bag to store/protect the table. Cap'n have you found anything?

_________________
Current: SL 222 2010 - AQUAVIT
Previous: 180 RX 1997 - BATTEN

Sad to say, but we use a garbage bag. Actually does a good job keeping it clean.

I would have loved one of those side mount tables, but I didn't think the frame for the bench seat would be strong enough. Here's a quick pic I took with my cell phone today.

_________________
2010 H190 4.3VP
Tow Vehicle:
2007 F150
Previous boats:
2009 H180 3.0VP
1996 Horizon QX 3.0VP