OK we put our boat in a slip Saturday, for the first time. It was a little windy but still a beautiful warm day. everything went great!!
Hooked up the water, electric, stored stuff in our new dockbox, who could be happier!! The next morning we got up and made coffee then walked out to the patio we have on the slip. As I steped on the swim platform I noticed it was a little wet, but did not think anything of it. As I was sitting at the table on the patio I looked at the swim platform and noticed a little trickle of water
.So I turned the water off, raised the engine hatch, and found the sound proofing insulation to be soaked
. After I removed the pressure regulator where the hose is attached I found that the fitting on the back was only threaded on by 2 threads, another thing that was never tested @ the factory!! (among many others ) I tightened the fitting and all is now working correctly. I would suggest that everyone that has one remove the four screws and check the fittings for tightness. It was still great to be on the water again.
Happy boating everyone
Login
FAQ
Search
(