EvilZ wrote:
Sorry, but unfortunately they are very different...the RM-60 is what I upgraded to when I replaced the head unit.
The bolts should be easy - just head down to Home Depot/Lowes, etc and find the right size bolt that slots into the back of the remote and then pick up the appropriate nuts/washers.
The foam ring you'll likely have to just make - shouldn't be too hard either. Nothing special about the foam as far as I can tell.
I can see if I still have the plans for the RM-60 if that would help for sizes, etc?
Erik
I have the plans/instructions, I just had difficulty finding the proper length bolt in stainless. HD didn't have it, I'll check Lowes.
_________________
2011 SL242 5.7 VP GXi - 320 HP Dual Prop
