The Four Winns website finally put the old catalogs back on line so you can go there and look to see what they looked like when the boat was built. I think you will probably have to have them made, they're pretty simple so I don't think it will cost all that much. The other alternative is to replace them with a pair of folding seats like they use on bass boats, if you can get some to match the color scheme that the boat has. Those seats are usually smaller than the typical helm seats and might fit in the space between the engine dog house and the gunnels. When I re-did my boat I considered converting it from the sunsport seating with the big sun pad and bench seat to the jump seats and engine dog house, but it was more work than I wanted to do and I like the storage that the sunsport seat design has. The jumpseats do give more deck space and easier engine access though. I would up keeping it the way it was but I modified the engine bulkheads to make them easier to remove for maintenance.
_________________ 88 Four Winns 200 Horizon 4.3 OMC Cobra-4bbl 2002 Walker Bay 10/2012 Suzuki 2.5 2008 Walker Bay 8
1998 Jeep Grand Cherokee 4.0/Selectrac 2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II
|