I stepped on the bilge hose and broke my original (1997) Attwood V1250 bilge pump
They dont make it anymore, and its impossible to find even a used one.
Any suggestions on a new bilge pump? Also, should I increase the gph to 1500 or 2000? My logic is, the pump will not be pumping at 1500gph anyways due to lift and length of the bilge hose. It will likely be pumping somewhere closer to 1000gph. I have 1 1/8" hose, which I read can handle up to 1500gph. Anyways...just an idea. Suggestions are appreciated!