kd4pbs wrote:
Kenwood units have that zone control too, as well as Sony, Clarion, Spark-O-Matic, ElCheapo Deck, and every other 4-speaker deck I've ever seen. They just refer to it in the standard convention called "fader". I haven't listened to a fusion, so I can't comment on the audio quality.
I second a Kenwood unit, for the reasons Ric stated. Unless you can't mount the unit behind a waterproof panel and can't fit it in one of the marine 1-DIN waterproof face covers, in which case your only choice would be a sealed unit.
No, this is not the fade control. You can program the remote in that area to control that zone.
From the manual, better then typing:
ZONES
Zone 1 and 2 are powered by the on board Class-D amplifier. External
amplifiers are required to utilize the 4 line outputs and 4 subwoofer outputs.
You can pre-set the balance, volume limit, sub-woofer level and name for each
of the four Zones available on the 700 Series. If required, you can also:
• Enable or disable Zones 2, 3 and 4 (Zone 1 is always enabled).
• Enable or disable volume control (Zones 3 and 4 only).
• Link Zones 1 and 2.
No need for waterproof cover, its IPx5 waterproof rated.
http://www.panbo.com/archives/2011/10/f ... kerel.html