www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat May 03, 2025 6:31 pm

View unanswered posts | View active topics


Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 28 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Toddely
PostPosted: Wed Jul 16, 2014 9:02 am 
Offline
email admin your custom rank

Joined: Sun Nov 20, 2011 8:14 am
Posts: 376
Location: Columbus ,Ohio
Will this wheel match right up to our boat. No hub needed? I really like the look and need to know what I need to get to make it work. looks like the allen screws will match right up..?

_________________
1997 Horizon RS 180
5.7 GL Volvo Penta /SX drive. (1.60)
2018 Ford F-150 super crew 4x4
Top
 Profile  
 
newbiechris
PostPosted: Wed Jul 16, 2014 9:26 am 
Offline
Dolphin
User avatar

Joined: Sun May 18, 2014 11:42 pm
Posts: 75
Toddely wrote:
Will this wheel match right up to our boat. No hub needed? I really like the look and need to know what I need to get to make it work. looks like the allen screws will match right up..?


I just ordered the wheel in hopes it will bolt right on. It looks like it will but I will let you know when I get it

Should be here within a week
Top
 Profile  
 
Toddely
PostPosted: Wed Jul 16, 2014 11:05 am 
Offline
email admin your custom rank

Joined: Sun Nov 20, 2011 8:14 am
Posts: 376
Location: Columbus ,Ohio
Sweet. please keep me posted.. I am diggin the look .

_________________
1997 Horizon RS 180
5.7 GL Volvo Penta /SX drive. (1.60)
2018 Ford F-150 super crew 4x4
Top
 Profile  
 
Graham R
PostPosted: Wed Jul 16, 2014 4:26 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK
Toddely wrote:
Will this wheel match right up to our boat. No hub needed? I really like the look and need to know what I need to get to make it work. looks like the allen screws will match right up..?


Probably "yes"; the Italian wheels invariably use the 6 bolt "Momo" set up. An exception in the "Victor" wheels, which use a 5 bolt set up but with the same radius; it's quite easy to redrill such a wheel to fit the Momo bolt spacing, but some filling is required due to overlap. With boat power steering, there's not a lot force involved, so any slight weakness doesn't really matter.


Last edited by Graham R on Mon Aug 18, 2014 3:03 am, edited 1 time in total.

Top
 Profile  
 
deafwish
PostPosted: Wed Jul 16, 2014 4:35 pm 
Offline
email admin your custom rank

Joined: Fri Jul 27, 2012 11:17 pm
Posts: 1303
Location: Melbourne, Australia
My 1997 Horizon RS had a 'Nardi PCD' Boss Kit.
If you buy a 'MOMO PCD', it won't fit straight.

Nardi PCD has the two top bolt hoses at 11 o'clock and 1 o'clock.
MOMO PCD has a singular top hole at 12 o'clock.

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS
Top
 Profile  
 
newbiechris
PostPosted: Sun Aug 17, 2014 4:52 pm 
Offline
Dolphin
User avatar

Joined: Sun May 18, 2014 11:42 pm
Posts: 75
[/img][/url]
Image


Wheel colour is a little lighter then I had hoped
I also have to order a new hub for it to fit.
Should be here early September
Top
 Profile  
 
newbiechris
PostPosted: Thu Oct 09, 2014 8:42 pm 
Offline
Dolphin
User avatar

Joined: Sun May 18, 2014 11:42 pm
Posts: 75
Image
Top
 Profile  
 
newbiechris
PostPosted: Thu Oct 09, 2014 8:45 pm 
Offline
Dolphin
User avatar

Joined: Sun May 18, 2014 11:42 pm
Posts: 75
Image
Top
 Profile  
 
deafwish
PostPosted: Thu Oct 09, 2014 9:59 pm 
Offline
email admin your custom rank

Joined: Fri Jul 27, 2012 11:17 pm
Posts: 1303
Location: Melbourne, Australia
Looks great! 8)

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS
Top
 Profile  
 
meinmelb
PostPosted: Thu Oct 09, 2014 10:25 pm 
Offline
email admin your custom rank
User avatar

Joined: Thu Feb 27, 2014 4:04 am
Posts: 219
Location: Melbourne Australia
Personally I prefer leather to wood :twisted: :twisted: But that looks nice!

_________________
Cheers

Mark
Melbourne
Australia

Boats:
Current: 2004 FW 190
2001 Mastercraft X5
1998 Malibu Response
1999 Sea Ray 180
17 ft Scimitar Barefoot (200hp Yamaha)
16ft Scimitar Ski (Yamaha 115)
1988 Ski Nautique ( Called Ski Antique)
Top
 Profile  
 
Bayboater
PostPosted: Fri Oct 10, 2014 1:22 am 
Offline
Shark
User avatar

Joined: Sun Jan 12, 2014 4:43 am
Posts: 146
meinmelb wrote:
Personally I prefer leather to wood :twisted: :twisted: But that looks nice!

With you there bro....

Wouldn't the mahogany wheel get hot......and slippery when wet??

Cheers, Craig

_________________
Image

2007 H220 5.7 MAG
Top
 Profile  
 
deafwish
PostPosted: Fri Oct 10, 2014 3:10 am 
Offline
email admin your custom rank

Joined: Fri Jul 27, 2012 11:17 pm
Posts: 1303
Location: Melbourne, Australia
Leather + salt = fail.
My timber wheel has never been too hot to touch or slippery to operate.
I'd hazard a guess that black leather would get hotter than timber?!

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS
Top
 Profile  
 
newbiechris
PostPosted: Fri Oct 10, 2014 8:25 pm 
Offline
Dolphin
User avatar

Joined: Sun May 18, 2014 11:42 pm
Posts: 75
deafwish wrote:
Looks great! 8)


Thanks! I still want to get the fourwinns insert but haven't got around to it yet
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 28 posts ]  Go to page Previous  1, 2

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group