www.iFourWinns.com

Hi,
Can anyone tell me the width of the H180 (mine is 2006) at the level of the trailer fenders?
Also how far are the bunks apart?
I'm about to buy a trailer and would like to make sure my boat will fit.
Thanks

_________________
GalacticWaterman
Boat: Four Winns H180 2006 3.0L Mercruiser 135 hp with Alpha I Gen. 2
Tow Vehicle: Honda Ridgeline

I suppose the important measurement is the width between fenders of the trailer.
Would someone with H180 or the original FourWinns trailer be able to measure that and let me know?
Thanks

_________________
GalacticWaterman
Boat: Four Winns H180 2006 3.0L Mercruiser 135 hp with Alpha I Gen. 2
Tow Vehicle: Honda Ridgeline

If you go to the following link you will find the info you need. Four Winns usually has a fast facts about a lot of their boat.
http://www.fourwinns.com/upload/Documen ... s_2006.pdf

_________________

2009, H210, 5.7Gi

I meant to mention that the spec's are also there for the H180 trailer, as well as the boat spec's.

_________________

2009, H210, 5.7Gi

Thanks for the link.
I do have that pdf file but unfortunately it does not list the width between the fenders.
I may have to call FourWinns and see whether someone there can find the info.

_________________
GalacticWaterman
Boat: Four Winns H180 2006 3.0L Mercruiser 135 hp with Alpha I Gen. 2
Tow Vehicle: Honda Ridgeline

If you allow about 5" to 6" on either side on top of the Four Winns beam width spec for your boat, you should be fine.

_________________

2009, H210, 5.7Gi