www.iFourWinns.com

I am running two auctions ending this weekend that may be of interest to many here. One is for a Tank Watch waste and water system level monitoring system:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230235211049&ssPageName=ADME:X:AAQ:MOTORS:1123

http://cgi.ebay.com/ebaymotors/ws/eBayI ... OTORS:1123

The other auction is for a Four Winns OEM 2003 328 Vista Macerator and related hoses:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230235055534&ssPageName=ADME:X:AAQ:MOTORS:1123

http://cgi.ebay.com/ebaymotors/ws/eBayI ... OTORS:1123

_________________

2014 Vista V435
2011 Glastron GT180
2013 Sea Doo RXT-260

So you removed your whole waste tank setup? Or just the overboard macerator? Our 348 didn't come with the macerator option (not that we could ever use it either).

I installed that tank watch setup on our 348, in replacement of the miserable Xintex setup. It worked well the tail end of last season. I opted to do a flange based install instead of the there separate rubber press-fit style. Installing the flange was a pain in the ass. But I feel a little better knowing there's a mechanical seal instead of the pressure-fit.

_________________
-Bill Kearney, 2005 348 Vista

Just removed the macerator. Seemed like it was always in the way with engine maintenance and since I couldn't use it, I decided life was simpler with it removed. Other reason I removed it is I was able to install a rubbermaid 24" sqare tote to store a variety of things.

I also removed the Xintex sensors since they never worked and opted for the Snake River. No complaints with it and I suspect the Tank Watch is just as good since Four Winns was going that way for their OEM system.

_________________

2014 Vista V435
2011 Glastron GT180
2013 Sea Doo RXT-260