Another VDO Replacement Question

cimolifam · **Posted:** Fri Jul 05, 2013 11:57 am

Hello,
I have a 1996 Four Winns 200 Horizon that I would like to get a replacement dash for. I have contact Four Winns and here is what they say:

We do not currently offer a replacement dash cluster for the original OMC module. I have attached a file with the appropriate parts #’s attached for your model year. You can contact Bombardier @ 847-689-7090. They now own OMC. Can also contact http://www.cdielectronics.com/.

I have called Bombardier and they cannot help me and cdielecronics has yet to return my calls and email. I would like to get a updated gauge setup that is not really VDO. Any help would be great!

Thank you,
Mark

sonyavdz1 · **Joined:** Mon Oct 12, 2015 3:30 pm **Posts:** 1

Did you ever figure a solution?

jontmiller · **Joined:** Thu Jul 26, 2012 8:16 am **Posts:** 296

I went this route and have been happy.

viewtopic.php?f=3&t=12745

rpengr · **Posted:** Tue Oct 13, 2015 9:03 am

jontmiller wrote:

I went this route and have been happy.

viewtopic.php?f=3&t=12745

Yes, that's very classy. That is what I will do if/when my VDO fails.

ridepate · **Joined:** Tue Apr 05, 2011 9:56 pm **Posts:** 220

My 2000 VDO panel has had the ground-mod and except for a worn-out paddle-wheel speedo sensor, it works great! But if it does take the proverbial-crap I will be going this route. Looks great!

jontmiller · **Joined:** Thu Jul 26, 2012 8:16 am **Posts:** 296

For the record....after installing the 'new' panel it had issues which were fixed when I cleaned up all the ground connections on the engine block : )

That said I still like the new panel better....and if anyone wants the old one it goes on ebay occasionally

www.iFourWinns.com

Another VDO Replacement Question

Who is online