lookking for a 2007 H200 trim peice

tsandu · **Posted:** Mon Nov 23, 2015 1:27 am

Hi all,

new to this forum.. I am in Australia, so not in USA..

Anyway question for you.. I am looking at buying a four winns h200 2007 model, but its missing the trim on the right hand side of the steering console. Its the grey plastic piece from above the radio remote, that curves round over the vinyl. The small woodgrain piece just above is also missing, but not as concerned about that, as will be mounting a gps/fishfinder there anyway. Anybody able to help in locating this trim piece? Any tips would be greatly appreciated. i have tried emailing a few ebay people posting parts on ebay, but did not have any luck. Thanks in advance

GottWhat · **Posted:** Mon Nov 23, 2015 3:20 pm

Welcome to the forum. Do you have a photo of what you are talking about?

tsandu · **Posted:** Mon Nov 23, 2015 6:54 pm

Hi, hopefully this works :

This is the actual boat.. so towards the right hand side of the steering wheel.. there should be a plastic grey trim.. starting just above the radio remote, and going towards the throttle control.. (you can see the indentation in the vinyl where it should be. The cut in the vinyl is where the trim mounts should go.

Thanks in advance.

TX H210SS · **Joined:** Thu May 27, 2010 9:10 am **Posts:** 1488

Are you sure its a 2007 H200....dash seems different to me.

tsandu · **Posted:** Wed Nov 25, 2015 10:58 pm

I cant see the last image, but its a aus 2007.. which from my searches.. seem to indicate its what in usa they call a 2006 model. Have seen a number of 2005... 2006.. and 2007 h200's with the same setup.

deafwish · **Posted:** Thu Nov 26, 2015 3:23 pm

Get a stainless steel piece made and consider having it vinyl wrapped to match?

Cheers.

tsandu · **Posted:** Thu Nov 26, 2015 4:19 pm

Yeah that is my next option.. althought will probably make it in aluminium as can work that better at home.. but if i can get the proper item would look nicer.

TX H210SS · **Joined:** Thu May 27, 2010 9:10 am **Posts:** 1488

That's a good idea. ...have fun with it and have boat name stitched in vinyl....it may be a while before ya find that piece....I checked aftermarket trim shops and nothing. Congrats on the purchase.

LouC · **Posted:** Thu Nov 26, 2015 7:48 pm

It might be easier to make up a piece out of wood, shape it to fit and then cover it with fabric....

deafwish · **Posted:** Fri Nov 27, 2015 3:18 am

Oh & where in Aus are you?!
Update your profile. :wink:

tsandu · **Posted:** Fri Nov 27, 2015 4:01 am

updated..

might have another option.. 3d printing it.. hmm

www.iFourWinns.com

lookking for a 2007 H200 trim peice

Who is online