TX H210SS wrote:
Have you had a boat there before and if so, was this an issue? I ask because after watching video again, I don't see any pitting or surface issue.
Just curious if you have high iron content in water you use to wash down with. Like maybe it could be the iron in the water that's rusting. If so, I would guess it would wipe off the stainless easily.
Just pondering because I see no other reports of this and seems odd. Something is going on. Im no expert but will say I am on well water and have high iron content in water...my water filter is rusty and it has no metal in it.
I was thinking along those lines too. Like maybe they were grinding or sandblasting the iron structure nearby and got some iron powder scattered about. Then rinsed it off but it could get caught in many of the spots that you show.
If this is poor quality stainless, then that is very disappointing indeed.
The only rust stains I have seen on my boat are from the boarding ladder pivot points.
_________________

"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings