73Driver wrote:
Hi guys.. update. No power on sockets. Light bulbs good. Circuit breakers are all in. The switches light up and the arch lights courtesy light up but not the ones pictured above. Not sure where disconnect is or if there is another circuit breaker I may have missed..
Carlos
Carlos
I would pull both switches and create a wiring diagram from where you verify the wires go.... there should be a hot into a switch, something connecting the switches together (in house wiring we call these travelers) then a switchleg out to the light..... has to be a bad wire/connection from the switch to the first lamp (because nothing works) or the ground from the first lamp back to the source....
If you tried to read 12 volts at the lamp by checking the socket, maybe you have 12 volt hot, but not the ground.... read the hot and connect the other lead back to a known ground.... or use a continuity tester to read between the ground on the battery and the black at the socket....