www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Fri May 02, 2025 4:05 pm

View unanswered posts | View active topics


Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Reggie
PostPosted: Thu Jan 12, 2017 8:16 am 
Offline
Guppy

Joined: Sun Sep 04, 2016 8:32 am
Posts: 6
Horn not working. Fuse is good. Haven't got into testing for power yet. Anyone have this problem?
Top
 Profile  
 
Cap'n Morgan
PostPosted: Thu Jan 12, 2017 9:19 am 
Offline
268 Vista

Joined: Tue May 16, 2006 9:49 am
Posts: 4989
Location: West Michigan
Reggie wrote:
Horn not working. Fuse is good. Haven't got into testing for power yet. Anyone have this problem?


Everyone has this problem at one time or another. I did with our 268, so did 3 other's I boat with
with 268's. It's not the boat, it is the horn and where it is located that is the problem. There are several
posts on here detailing the issue. Try a search.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista
Image
Current Boat: 2004 Chaparral 235 ssi cuddy
Image
Top
 Profile  
 
FireCapt6
PostPosted: Fri Jan 13, 2017 4:58 pm 
Offline
Clownfish

Joined: Mon Feb 25, 2013 8:40 pm
Posts: 41
I spent hours trouble shooting, taking apart, rebuilding, testing, taking apart and then went to the store and purchased a new one. Worked great.

_________________
2007 358 Vista
Top
 Profile  
 
Graham R
PostPosted: Fri Jan 13, 2017 5:46 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK
FireCapt6 wrote:
I spent hours trouble shooting, taking apart, rebuilding, testing, taking apart and then went to the store and purchased a new one. Worked great.


The best solution is a couple of airhorns mounted well above any exposure to water spray. Either electric, or with a remote compressor for real noise.
Top
 Profile  
 
riverratt
PostPosted: Wed Jan 18, 2017 7:54 am 
Offline
Minnow

Joined: Wed Sep 18, 2013 8:42 am
Posts: 10
Take a piece of emory cloth/paper, fold in half, open the points, insert sandpaper, close points and sand to polish. Finish with a drop of WD40 for protection. You may have to adjust the screw but probably not.
Top
 Profile  
 
su2skelsey
PostPosted: Sat Feb 04, 2017 8:11 am 
Offline
email admin your custom rank

Joined: Wed May 28, 2008 10:14 am
Posts: 280
Location: North East, MD
I've taken mine apart and tried to clean it and it worked a little. I ended up replacing it and the new horn works great.

_________________
__________________________________________
Image
2004 268 Vista "Satisfy My Sol"
Top
 Profile  
 
Partner Ship
PostPosted: Thu Feb 23, 2017 5:16 pm 
Offline
Seahorse

Joined: Sat May 27, 2006 6:56 am
Posts: 27
Location: Ann Arbor, MI
We had the same problem on our 2000 268. We bought a brand new horn, but still had a problem. Ended up that the helm switch was intermittently going bad. Replaced that switch and horn has worked fine ever since. Good luck!

_________________
2000 Vista 268
Top
 Profile  
 
Kiito
PostPosted: Wed Mar 01, 2017 2:44 pm 
Offline
Tadpole

Joined: Wed Mar 01, 2017 4:30 am
Posts: 1
Hi team, yes I'm a newbie. I have a Vista 248 and the horn is not working. However mine is blowing fuses. Would someone be able to tell me where the wires run. I know where it starts and finishes. My thought is above the lighting panel in the galley?
Top
 Profile  
 
chris268
PostPosted: Wed Mar 01, 2017 3:30 pm 
Offline
Livin' the Dream
User avatar

Joined: Thu Sep 29, 2016 9:23 am
Posts: 547
Location: Pontoon Beach IL
Did you disconnect it at the horn and see if it's still a short?

_________________
Current:
2000 Sea Ray 380 Sundancer "still Livin the Dream"

Past
2002 268 Vista 5.7 GXI "Livin' the Dream"
1996 Rinker 192 Captiva. "The Simple Life"
1999 Yamaha XLL 1200 Waverunner.
1976 Mercury Marquis tri hull 120 hp
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group