'93 190 Horizon. 20 year revival (Pic heavy)

Jsyphil · **Posted:** Wed Jan 18, 2017 7:05 am

Good luck! From my experience it takes longer to stretch, staple and trim onto seats than it does to actually stitch the covers.

Jdpber · **Posted:** Thu Jan 19, 2017 8:29 pm

Jsyphil wrote:

Good luck! From my experience it takes longer to stretch, staple and trim onto seats than it does to actually stitch the covers.

I have the winter

Jdpber · **Posted:** Sun Feb 05, 2017 8:23 pm

2.5 hours of pictures and pulling staples. 2" of staples in a solo cup. all of the seats are apart. New structure and sewing will begin tomorrow.

this is a polished aluminum strip and a hard rubber cording will slide in it to attach the rear seat back. As I am not going to have pad on top of the engine hatch but only nonskid. A few hidden snaps will be along the bottom of the backrest.

Jdpber · **Posted:** Mon Feb 27, 2017 4:19 pm

ok got busy BUT we are in full swing upholstery.

so far all new seat structures.

these are the back centers of the captain seats.

LouC · **Posted:** Tue Feb 28, 2017 8:54 pm

Lookin great, that boat is going to be better than new, and better than what they are selling now. This is the beauty of re-doing your own boat the way you want it....

chris268 · **Posted:** Tue Feb 28, 2017 10:52 pm

Can't wait to see this finished, that's gonna look awesome!

rgoals2win · **Posted:** Tue Mar 21, 2017 12:11 am

I'm eagerly anticipating the next posts...! It's been three weeks and I know you have a life and all, but apparently I don't, because I keep looking to see if there's anything new going on in this thread. Too interesting to turn away from. ☺️

Jdpber · **Posted:** Tue Mar 21, 2017 8:14 am

ok progress has been made, sorry for the delay. The bow butt seats are sewn and need to be mounted to the structure and foam. I am working on a captain seat at the moment. Then i will pull the bow back rests. after that is the aft bench seat. my little helper.

Jdpber · **Posted:** Tue Mar 21, 2017 8:21 am

Capt. Hoss · **Posted:** Tue Mar 21, 2017 1:00 pm

Be honest with us, the helper is doing all this work, right? He just don't have time for the picture taking stuff.

rgoals2win · **Posted:** Sat Mar 25, 2017 1:24 am

Your helper is adorable...!

Thanks for the update. Continues to amaze me that you take on every job that is needed in this restoration. My compliments.

Wonderful results.

Jdpber · **Posted:** Sun Mar 26, 2017 9:13 am

skidaddytn · **Joined:** Mon May 03, 2010 11:12 am **Posts:** 281

The tire cover looks cool, but I wonder if that will collect water and cause some nasty mold and dry rot issues?

rpengr · **Posted:** Mon Mar 27, 2017 3:41 pm

skidaddytn wrote:

The tire cover looks cool, but I wonder if that will collect water and cause some nasty mold and dry rot issues?

Looks like it has a gap and drawstring at the bottom, so it will not collect water.

mannix2 · **Posted:** Mon Mar 27, 2017 7:41 pm

I've often thought about a tire cover but worry about wasp and bees making a nest.

www.iFourWinns.com

'93 190 Horizon. 20 year revival (Pic heavy)

Who is online