powellcrazy wrote:
IMHO, the hour meter only tells you how many hours the ignition was turned on, not what rpms or load motor has seen during that time.
It is good info, but you need more info to help substantiate hour meter info. Example: oil sample, compression test, visual checks, maint. records, ect...
Very good advice PC. In addition to what PC mentions above.
The Volvo software for a laptop will tell you all the details. My mechanic bought it a couple of years ago. I think he paid about $600 for the disc and cable to hook it up to the ECM.
It told, how many hours the engine was run at certain RPM. From that info you could tell if it was ran mostly at cruising speeds, idle, or somewhere in between. It will display 30 engine parameters at one time. It also records and graphs all EFI sensor data for future reference.
Hopefully your mechanic will have this. It WILL tell you what the engines' lifecycle has been , and it's current state of health.
_________________
One of 4 Previous (Sold) Boats:2000 Four Winns 268 Vista
Current Boat: 2004 Chaparral
235 ssi cuddy
