mkivbren wrote:
IHey, did you have any luck performing the DSM software update yet?
Ah, yes. I've been meaning to mention this on the other thread. I performed one of my least favorite tasks and pulled the E80 to gain access to the DSM, which was necessary to cycle the power independently. I got through the whole process in about an hour, taking my time and backing everything up. While it's briefly mentioned in the instructions from Raymarine, you do not do a factory reset of the E80 with this update. The way it's written is a bit ambiguous and a full reset would have been easy to do by mistake requiring a lot more reconfiguring. There were a few other quirks with the process as well but I got through it.
In the end, doing the update did not wipe out my waypoints or routes but it did wipe my customized pages. It will be interesting to see if the update helps with my chronic issue of loss of readout from the DSM at cruise speed. I doubt it will but I have not had the boat on plane since going in. Too much debris in the water right now. Fortunately, the factory is on my side with getting this fixed but I'm not ready to drill yet another hole in the boat and will be taking more comprehensive notes on this problem this season, assuming the problem persists.
Caught your thread title change too
