www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Mon May 12, 2025 9:48 am

View unanswered posts | View active topics


Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
rmarini
 Post subject: Bilge Pump Upgrades
PostPosted: Fri Apr 08, 2011 12:29 pm 
Offline
Clownfish

Joined: Thu Apr 15, 2010 9:19 am
Posts: 43
Anyone done any Bilge Pump Upgrades or dual installs on a H200? If so, what? I am looking to improve on the stock set-up and perhaps install a second pump as back up.

Thanks

_________________
RICK|2009 H200 5.0L MERC|2010 RAM 1500 LARAMIE
Beautiful Okanagan Valley, British Columbia
Image
Top
 Profile  
 
Paul I.
 Post subject: Re: Bilge Pump Upgrades
PostPosted: Fri Apr 08, 2011 3:07 pm 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
I am not sure what you are asking, but I have always added a back-up pump.

It is simple to install and wire. The biggest thing if you will, you must drill though the side of your boat for the discharge. I just use a pump with a built in float, and wire it to my 2nd battery with a in line fuse.

Hope that helps.
Top
 Profile  
 
chrisvs
 Post subject: Re: Bilge Pump Upgrades
PostPosted: Mon Apr 11, 2011 7:14 am 
Offline
email admin your custom rank

Joined: Thu Apr 05, 2007 1:10 pm
Posts: 531
Location: North Bay, Ontario Canada
Have a look here for the primary pump upgrade...
http://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=1206&hilit=bilge+pump+upgrade

Have a look here for a secondary pump install....
http://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=1956&p=18540&hilit=second+season+upgrades#p18540

Jim_R did a fantastic job of documenting this very subject when upgrading his boat.

Another upgrade you may wish to consider is an upgraded switch. I was having a problem in my second season of the bilge pump switch sticking in the on position, and draining the battery. I installed one of these on my previous boat, and never had a problem afterwards. For safety's sake, one will make it into my new boat this year

http://www.johnson-pump.com/jpmarine/products/bilge/ultimaswitch.html

_________________
2009 H180 w/3.0 Merc
Homebuilt Minimax Hydro
2011 Zodiac Cadet 310
Image Image
Top
 Profile  
 
Paul I.
 Post subject: Re: Bilge Pump Upgrades
PostPosted: Mon Apr 11, 2011 1:09 pm 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
I must say those are very GOOD links!!!

Note on the 2nd link, what type of hose is is using vs the first one. The smother hose will give you more GPH flow. What they (Rule or any of them) don't tell you is, the pump rated at zero feet. In other words, take a 500 GPH pump, put a 6 FOOT hose on it, that now has to pump say 2ft UP. The output could be down to 450 GPH.

I leave the stock pump alone, and add a 2nd one for the above reason and if the other burns out, clogs or anything. You have the 2nd one to fall back on. :)
Top
 Profile  
 
rmarini
 Post subject: Re: Bilge Pump Upgrades
PostPosted: Sat Apr 16, 2011 8:23 pm 
Offline
Clownfish

Joined: Thu Apr 15, 2010 9:19 am
Posts: 43
Awesome info...thank you to all....

_________________
RICK|2009 H200 5.0L MERC|2010 RAM 1500 LARAMIE
Beautiful Okanagan Valley, British Columbia
Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group