www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat May 03, 2025 6:20 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Trim Gauge not Working
PostPosted: Sat May 14, 2011 4:54 pm 
Offline
Minnow

Joined: Wed Jan 12, 2011 12:57 pm
Posts: 19
Location: Lake Simcoe, Ontario
1994 258 Vista 5.8 Cobra SX. The drive trims up and down ok but the gauge just sits at the bottom. The needle twitches slightly but that's about it. Could it be a sender/relay problem?

Thanks
Mark

_________________
Previous
1984 Checkmate - Twin 125HP Merc's
1967 Starcraft Holiday - 40HP Johnson


Top
 Profile  
 
PostPosted: Sat May 14, 2011 6:18 pm 
Offline
email admin your custom rank

Joined: Tue Apr 05, 2011 9:56 pm
Posts: 220
I'd say sender. Mine acted the same. Serria now makes a replacement.

_________________
Image

Jimbo
Na. Ga.

2000 170 Horizon LS
4.3GL


Top
 Profile  
 
PostPosted: Sat May 14, 2011 7:26 pm 
Offline
Minnow

Joined: Wed Jan 12, 2011 12:57 pm
Posts: 19
Location: Lake Simcoe, Ontario
Thanks Jimbo. Now the stupid question. where would I find the sender? :?:

_________________
Previous
1984 Checkmate - Twin 125HP Merc's
1967 Starcraft Holiday - 40HP Johnson


Top
 Profile  
 
PostPosted: Sat May 14, 2011 10:26 pm 
Offline
email admin your custom rank

Joined: Thu Jun 29, 2006 10:26 pm
Posts: 5688
Location: Long Island NY
Look here...part # 86
http://www.dougrussell.com/partscatalog ... ,1766,1374


on my old 88 I usually have to replace them every 2 years because of salt water use...

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II


Top
 Profile  
 
PostPosted: Sat May 14, 2011 11:44 pm 
Offline
email admin your custom rank

Joined: Tue Apr 05, 2011 9:56 pm
Posts: 220
I bought mine here-Not sure if yours is the same. It says to 93.


http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0759186858

_________________
Image

Jimbo
Na. Ga.

2000 170 Horizon LS
4.3GL


Top
 Profile  
 
PostPosted: Sun May 15, 2011 7:46 am 
Offline
Minnow

Joined: Wed Jan 12, 2011 12:57 pm
Posts: 19
Location: Lake Simcoe, Ontario
Thanks guys. The PO had a new gimble bearing and seals replaced last fall. Could be the sender got disconnected. I'll have a look when they pull the boat for the survey.

_________________
Previous
1984 Checkmate - Twin 125HP Merc's
1967 Starcraft Holiday - 40HP Johnson


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group