www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Mon May 12, 2025 4:38 pm

View unanswered posts | View active topics


Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
nathan
 Post subject: ac sea water pump
PostPosted: Sun Jun 12, 2011 7:46 pm 
Offline
Seahorse

Joined: Thu May 27, 2010 11:16 pm
Posts: 28
i need to replace the sea water pump. it comes with a 5 ft cord. Does it run to the ac unit itself or the ac panel switch. Also can i just splice it to the old cord, getting wet would not be an issue. it looks like a pain to run it to ac unit.
Top
 Profile  
 
firecadet613
 Post subject: Re: ac sea water pump
PostPosted: Sun Jun 12, 2011 9:17 pm 
Offline
email admin your custom rank

Joined: Thu Jul 13, 2006 7:45 pm
Posts: 2866
Location: Indiana
I believe the AC unit.

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225
Top
 Profile  
 
Bliss36
 Post subject: Re: ac sea water pump
PostPosted: Mon Jun 13, 2011 12:07 am 
Offline
email admin your custom rank
User avatar

Joined: Wed Mar 03, 2010 8:15 pm
Posts: 913
Location: NW Indiana
Nathan,
The wires coming from the a/c pump wire directly to the a/c unit. Tape the wires to the wires of the old pump to pull them thru the firewall.There is a small electrical connection box towards the top of the unit and It's held on with a couple of screws. Once you remove that panel you just strip the ends on the 3 wires and insert them into their individual recepticles (blk/grn/wh) and lock them in by tightning a small screw. It's actually alot easier than it sounds. Good luck!

_________________
Our Boating Blog: http://ben-dana.blogspot.com/
Image
2005 268 Vista "Sea Pickle II"
1979 AMF Alcort Puffer
Previous:
2003 FW190 Horizon
1973 Startcraft 18ft "Sea Pickle"
Top
 Profile  
 
nathan
 Post subject: Re: ac sea water pump
PostPosted: Mon Jul 11, 2011 9:41 pm 
Offline
Seahorse

Joined: Thu May 27, 2010 11:16 pm
Posts: 28
Bliss36 wrote:
Nathan,
The wires coming from the a/c pump wire directly to the a/c unit. Tape the wires to the wires of the old pump to pull them thru the firewall.There is a small electrical connection box towards the top of the unit and It's held on with a couple of screws. Once you remove that panel you just strip the ends on the 3 wires and insert them into their individual recepticles (blk/grn/wh) and lock them in by tightning a small screw. It's actually alot easier than it sounds. Good luck!


thanks problem solved
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group