www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Mon May 12, 2025 5:05 pm

View unanswered posts | View active topics


Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
su2skelsey
PostPosted: Mon Nov 14, 2011 6:36 pm 
Offline
email admin your custom rank

Joined: Wed May 28, 2008 10:14 am
Posts: 280
Location: North East, MD
As part of my winterization process it seems i need to give myself a extra project for the spring. After I drained the water out of the manifolds, engine block, water pump, etc. I was putting the plugs back in and when I got to the starboard engine block drain plug I guess I tighten it too tight and it broke off. I can't seem to find a part number or even a picture of it. I looked on the VP site and marinepartsexpress, etc. Does anyone know where I can find the part number and diagram of the part?

Thanks in advance,

Scott

2004 268 Vista
5.7 Gi-D VP engine.

_________________
__________________________________________
Image
2004 268 Vista "Satisfy My Sol"
Top
 Profile  
 
acguy
PostPosted: Mon Nov 14, 2011 7:58 pm 
Offline
email admin your custom rank

Joined: Sun Jul 05, 2009 5:56 am
Posts: 931
Location: Georgian Bay, Ontario
Not sure what yours look like but mine are all plugs with 9/16" heads on them. I think it's 3/8" mpt.

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike
Top
 Profile  
 
Borchik
PostPosted: Tue Nov 15, 2011 7:55 am 
Offline
email admin your custom rank

Joined: Mon Aug 02, 2010 6:38 am
Posts: 311
Location: Baldwinsville, NY
Its nothing special, every hardware store on the planet will have one, just bring the one out of the other side to match it up, its NPT pipe thread.

_________________
Brian Borchik
The Winds of Cold Springs Harbor Marina
Baldwinsville, NY
Top
 Profile  
 
su2skelsey
PostPosted: Tue Nov 15, 2011 8:23 am 
Offline
email admin your custom rank

Joined: Wed May 28, 2008 10:14 am
Posts: 280
Location: North East, MD
Unfortunately, it wasn't the drain plug that broke...It was the part that I was screwing the plug into that broke. I am still searching through Google for the part and a part number of the entire section.

_________________
__________________________________________
Image
2004 268 Vista "Satisfy My Sol"
Top
 Profile  
 
Partycove2
PostPosted: Tue Nov 15, 2011 9:40 am 
Offline
Shark

Joined: Wed May 28, 2008 1:06 pm
Posts: 149
Location: Bridgewater, PA
I believe you are talking about item # 6 below, it is PN 3850490
If it has a hose attached to it that goes to your hot water tank then this is it



Image

_________________
Bridgewater, PA
2008 Vista 318
Top
 Profile  
 
su2skelsey
PostPosted: Tue Nov 15, 2011 9:47 am 
Offline
email admin your custom rank

Joined: Wed May 28, 2008 10:14 am
Posts: 280
Location: North East, MD
Partycove2 -- Thanks... The drain plug on the other side of the water heater. Do you happen to know the part number for #11 in the diagram, that is the part the broke. Thanks for your help.

_________________
__________________________________________
Image
2004 268 Vista "Satisfy My Sol"
Top
 Profile  
 
Partycove2
PostPosted: Tue Nov 15, 2011 9:55 am 
Offline
Shark

Joined: Wed May 28, 2008 1:06 pm
Posts: 149
Location: Bridgewater, PA
4 Clamp 3853813 2 $5.30 Add to Cart
5 Fitting 3862196 1 $4.01 Add to Cart
6 Fitting 3850490 1 $9.92 Add to Cart
7 Hose Connection 856483 1 $61.01 Add to Cart
8 Hose, Circulation Pump 1 Cut
9 Plug 3850802 $6.44 Add to Cart
10 Nipple 3858501 $5.25 Add to Cart
11 Drain Cock 3854494 $13.09

_________________
Bridgewater, PA
2008 Vista 318
Top
 Profile  
 
su2skelsey
PostPosted: Tue Nov 15, 2011 10:59 am 
Offline
email admin your custom rank

Joined: Wed May 28, 2008 10:14 am
Posts: 280
Location: North East, MD
many thanks.... i appreciate it.

_________________
__________________________________________
Image
2004 268 Vista "Satisfy My Sol"
Top
 Profile  
 
Thalasso
PostPosted: Tue Nov 15, 2011 4:02 pm 
Offline
email admin your custom rank

Joined: Tue Jan 18, 2011 8:45 pm
Posts: 333
Partycove2 wrote:
4 Clamp 3853813 2 $5.30 Add to Cart
5 Fitting 3862196 1 $4.01 Add to Cart
6 Fitting 3850490 1 $9.92 Add to Cart
7 Hose Connection 856483 1 $61.01 Add to Cart
8 Hose, Circulation Pump 1 Cut
9 Plug 3850802 $6.44 Add to Cart
10 Nipple 3858501 $5.25 Add to Cart
11 Drain Cock 3854494 $13.09



you are good.
Top
 Profile  
 
su2skelsey
PostPosted: Tue Nov 15, 2011 5:15 pm 
Offline
email admin your custom rank

Joined: Wed May 28, 2008 10:14 am
Posts: 280
Location: North East, MD
I guess I should have looked closer at the schematic...

http://www.marinepartsexpress.com/vp_sch_fs.html

_________________
__________________________________________
Image
2004 268 Vista "Satisfy My Sol"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group