www.iFourWinns.com

Hi All, my walk through windshield leaks like crazy and I'd like to stop putting bowls under it. I know I need to replace the rubber that holds the glass in the frame as it's all dried up and shrunken. My questions are:

1. How do you remove the walk through section of the windshield? I see a small plastic clip in the middle of the 'hinge' but don't know how to get it out.
2. Anyone done this and what rubber did you use? I tried to go directly to Taylor, but their explaination of the options was horrible.

Thanks,

Steve.

_________________
1969 Chris Craft Commander 47
1999 Four Winns 328 Vista - SOLD

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

Excellent - thank you.

Any idea how to remove the center part of the windshield?

_________________
1969 Chris Craft Commander 47
1999 Four Winns 328 Vista - SOLD

bump

_________________
1969 Chris Craft Commander 47
1999 Four Winns 328 Vista - SOLD

No one? I just want to remove the center part of the walk through - the part that swings.

_________________
1969 Chris Craft Commander 47
1999 Four Winns 328 Vista - SOLD

I have more pictures, hopefully this will jog someones memory. I want to separate the hinge if I can, sort of like pulling the pin on a door hinge, except this has no pin.

A look at the end of the hinge:


The small plastic piece in the middle of the hinge that I think is holding it from lifting apart.


Another angle:


Overall image of the window I want to remove:


Any idea's?

_________________
1969 Chris Craft Commander 47
1999 Four Winns 328 Vista - SOLD