www.iFourWinns.com

The one in my boat has a broken face. I'd like to replace it without doing the in the hull transducer. Does anyone have one that I could purchase? I know it's discontinued and have already been looking on ebay. Just thought I'd try here before replacing it and the transducer with a later version.
Thanks Mike
Curtis629gmail.com if you want to email me directly.
Thanks,

Ive got two Lowrance 3500 depth gauges because my transducers went bad in both of my boats!!

Im in Michigan and would take $100 for one of them. Mine were recessed in the dash panel from the back side so I dont have any rings or accents to go on the front side. But in my experience, Four Winns mounts them from the backside of the panel so you wouldnt need those parts anyways.

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21

Hi there! I have the same problem....not being able to find a replacement Lowrance 3500 depth gauge. Do you still have one available?
My e mail address is: fbb@mindspring.com

Britt

Britt, yes I do have both. I just posted the other message today or yesterday, lol.

$100 + shipping.

They are both used, both have slight scratches on the face of the gauge that you'd expect from 15+ year old depth finder gauges. Either of them work great; it was my transducer that went bad in my case.

Let me know if you are interested. I will email you too

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21

I took some pictures tonight.

The white 3500 was out of my 1991 Sundowner. Its in good shape. The screen has a small scratch in the upper left corner not affecting its performance whatsoever and I didnt notice it until I had it out of the boat and inspected it very closely. You cannot see it any other time. (You cant even see it in this picture its so extremely small, but I wanted to disclose this!)

The black 3500 was out of 1997 Vista. Its in good shape too, except the outer lens has checking from sun/age. The black ring is held on with some kind of adhesive from the past owner.

Both work great and come with all necessary wiring/transducer plug/sound alarm. $100/each.

These are obsolete and I saw a new old stock one on ebay go for close to $300.

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21

I am looking at purchasing a 3500. Do you have one left? Please email me reichert_jamie@yahoo
thanks.

Hi there Technologic80,
I am sure you were swamp with this question but do you still have one of the 3500 available?

Thanks.

Allen

still have one of the 3500s available?
If so, please shoot me a note at haldmiller3@gmail.com

Sorry folks, the two 3500's I had sold immediately. The same guy bought both of them.

Keep on looking though, they're out there!!

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21