www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat May 10, 2025 6:23 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Nov 13, 2012 4:14 pm 
Offline
email admin your custom rank
User avatar

Joined: Fri Dec 31, 2010 3:23 pm
Posts: 715
Location: Michigan
For all you Merc guys:

I was reading that you can add a second Mercathode controller to the system and double the amount of corrosion protection for the outdirve. Has anyone done this?

If I understand correctly, all you have to do is jumper the terminals of the second controller to the terminals on the first one? Just mount it piggyback on top of the other controller??

_________________
2004 248 Vista "Amante"
MC 5.0MPI/B3


Image


Top
 Profile  
 
PostPosted: Wed Nov 14, 2012 3:39 pm 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
Yes, I have read obout it & almost did it. But I sold that boat.

Here is a good link on this: http://www.mercstuff.com/bravo3corrosion.htm


Top
 Profile  
 
PostPosted: Thu Nov 15, 2012 8:16 am 
Offline
email admin your custom rank
User avatar

Joined: Fri Dec 31, 2010 3:23 pm
Posts: 715
Location: Michigan
Yes I'd seen the mercstuff site. Great info on there.

I was hoping maybe someone had done this and maybe had a photo.
Hard to believe everyone with a Merc wouldn't do this considering it costs under $50 to double the corrosion protection.

_________________
2004 248 Vista "Amante"
MC 5.0MPI/B3


Image


Top
 Profile  
 
PostPosted: Thu Nov 15, 2012 8:42 am 
Offline
268 Vista

Joined: Tue May 16, 2006 9:49 am
Posts: 4989
Location: West Michigan
It's just a band aid. Does not help with stray current at a marina, or from anothert boat.
A Zinc Saver system is what you really need. We had a system installed on both our 268 Vista and
our 282CR. Never had any corrosion issues or worries.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista
Image
Current Boat: 2004 Chaparral 235 ssi cuddy
Image


Top
 Profile  
 
PostPosted: Thu Nov 15, 2012 10:10 am 
Offline
email admin your custom rank
User avatar

Joined: Fri Dec 31, 2010 3:23 pm
Posts: 715
Location: Michigan
Cap'n Morgan wrote:
It's just a band aid. Does not help with stray current at a marina, or from anothert boat.
A Zinc Saver system is what you really need. We had a system installed on both our 268 Vista and
our 282CR. Never had any corrosion issues or worries.


A Zinc Saver is just a Galvanic Isolator, correct? If so, then I already have one.

My drive has some paint flaking in spots and the beginnings of corrosion. I'm told that it looks very good for a boat that, as far as I know, has been kept in the water for 8 seasons.
Anyway I'm looking to touch up the flaking spots in the spring and make sure that the galvanic isolator and Mercathode systems are working correctly. Came across adding a second controller when searching for how to test the systems and figured it can't hurt. (probably the cheapest thing I've bought for the boat so far :lol: )

_________________
2004 248 Vista "Amante"
MC 5.0MPI/B3


Image


Last edited by JeffLW on Thu Nov 15, 2012 4:16 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Nov 15, 2012 11:10 am 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
I read it real quick, but yes I take it the same way. Its a galvanic isolator and with shore power, you better have it anyways.

I don't know by adding the Mercathode that it will give you double the protection? I am thinking more like 20 to 30% more. BUT for $50, I would use it anyways. Plus, it should take you under an hour to install, if not less.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group