firecadet613 wrote:
Powell what mount did you use and how did you run the wiring?
powellcrazy wrote:
I routed an A/C 110v out let and cord to the TV under the step/garbage can. I will mount an inverter in there as well. Wanting a 1000w, been looking at the 600w for price, only need 100 w for the TV.
I want all of it hard wired and hidden, but I have a 300w that plugs into a 12volt socket, but it is a cheap one and noisy, may as well run the generator and charge the battery's vs. drain them.
I had to custom make a TV mounting bracket, should have taken a photo or two when installing. I will try to get some next time I am in the boat. TV only sticks out from wall approx 1/2". Most mounting bracket were for home use and swiveled, tilted, ect... and that made them flimsy and hung of the wall more than I liked.
bndfishing wrote:
My TV is mounted where yours is. I have the DVD on the shelf in the v berth next to the head. Ran the HDMI cable behind the head up under the dash and have a hole for the HDMI and power. Ran an extension cord behind the head, behind the aft berth and into the engine compartment for DVD power. Except the DVD power cord and HDMI cable plugged into the DVD all other wires are out of site.
viewtopic.php?f=19&t=5012&st=0&sk=t&sd=a&start=15
_________________
One of 4 Previous (Sold) Boats:2000 Four Winns 268 Vista
Current Boat: 2004 Chaparral
235 ssi cuddy
